Status monitoring

Wireless modules for status monitoring sensors

There are a number of situations where you can apply status monitoring. For example: to register whether a door to your office is opened or closed, or to see how long a refrigerator has been open. Status monitoring is also used to check whether the heater is still switched on or to check that the tail lift of a truck is securely closed. Status monitoring registers whether something is switched on or off or is opened or closed.

 

  • WSE-DLXc/cc/ct

    • WSE-DLXc/cc/ct detects the status of switch contact signals. WSE-DLXcc detects status and status changes for switch contact signals. WSE-DLXct detects the status and measures the part of the sample interval (measured as %) in which the switch contact is close.
    • Detection speed: 1 time per second
    • Detection closed: Vin < 1V
    • Detection closed: Vin > 2V
    • Vmax: 30V
    • Housing: IP 65
    Download
  • WSE-DLXt

    • WSE-DLXt detects pulses, counts the number of pulses and transmits this cumulative value to the base station.
    • Maximum pulse rate: 100 pulses per second
    • Detection closed: Vin<1 V
    • Detection open: Vin>2 V,
    • Vmax= 30 V
    • Housing: IP 65
    Download
  • WSE-DLXt-pir

    • WSE-DLXt-pir is a motion sensor. It counts the pulses from the motion sensor and transmits this cumulative value to the base station.
    • Maximum pulse rate: 100 pulses per second
    • Housing: IP 65
    Download